Bryton Rider 320E GPS Cycling Computer
Bryton Rider 320E GPS Cycling Computer
The all new Rider 320 is specially designed to provide a clear and detailed viewing experience on the go. The 2.3 inch Mono LCD screen with 4 easy to access buttons, the Ride320 gives crystal clear access to your ride data anytime of the day or night. With enhanced convenience and compatibility, the Rider 320 provides support for BLE sensors. Allowing you to pair your Speed or Cadence sensor, Heart Rate Monitor or Power Meter including onscreen data for Pedal Powermeters.
Equipped with complete Global Navigation Satellite System (GNSS) support, the Rider 320 provides extensive coverage and versatility in all types of terrain, even in dense tree cover, in the mountains, built up urban zones or wide open roads. The Rider320 is ready for use anywhere in the world, thanks to incorporating access to the top 5 Global Navigation Satellite Systems (GNSS)
Simple but Powerful
Utilizing an advanced high-quality, optically bonded display, the Rider 320 is specially designed to provide a clear and versatile viewing experience Enhancing convenience and compatibility, the Rider 320 provides support for both ANT+ and BLE sensors. Equipped with complete Global Navigation Satellite System (GNSS) support, the Rider 320 provides more extensive coverage and versatility in any type of terrain, even in dense tree/building cover or in the mountains, as well as in more regions by incorporating the top 5 Global Navigation Satellite Systems (GNSS).
Crystal Clear Display
Designed to create the best viewing experience, the Rider 320 is built with crisp black and white 2.3” large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance.
ANT+/ BLE Sensors Support
Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 320 after simple pairing.
The Rider 320 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains.
Supports Up to 72+ Functions
Rider 320 provides rich data for accurately gauging the performance of each ride. It incorporates up to 72+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR.
35 Hours of Battery Life
The Rider 320 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording.
Power Meter Calibration & Pedal Support
The Rider 320 aims to increase the compatibility and functionality of ANT+ Power Meters by allowing riders to easily input crank length and calibrate their power meters for more precise power values. Additionally, the Rider 320 now supports Power Pedals, which can be easily calibrated in the same way and allow detailed L/R pedal power analysis.
Never worry about missing important phone calls, emails or texts during rides again! Rider 320 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones.
Customizable Data Display via App
Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!
Sync to Bryton Active App
Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks, Selfloops and Relive Auto Sync also make it easier to share activities and compare with millions.
STRAVA, TrainingPeaks, Selfloops and Relive Auto Sync
Compete with worldwide riders through Rider 320 recorded data. The Rider 320 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks, Selfloops and Relive. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.
- Supports up to 72+ functions
- Powerful, enhanced features
- 35 hours of battery life
- High contrast 2.3 Inch Mono LCD (Optical Clear Adhesive Bonding)
- Quick & simple data screen change via Bryton App
- Smart Notifications (SMS, Calls & Emails)
- Supports Full GNSS (Global)
- BLE smart 5.0 (for quick and easy data transfer)
- Built in barometer for altitude
- Auto Altitude Calibration by GPS
- BLE support for connecting to your additional sensors
- Pedal Power Meter compatible
- Heart rate & Power Meter zones
- Uploads to STRAVA / Relive / TrainingPeaks / Selfloops Auto Sync
- Lap history: 130 laps
- Log history: 300 hours
- Wireless connectivity: Bluetooth, ANT+
- Supported Bluetooth sensors: HRM, Speed, Cadence
- Supported ANT+ sensors: HRM, Speed, Cadence, Power
- Bryton Active App: via Bluetooth Low Energy (iOS & Android)
- Automatic activity upload: via Bryton Active App
- Update Software: via Bryton Update Tool
- Auto Sync to 3rd Party Platform : Strava, TrainingPeaks, Selfloops, Relive
- Golden Cheetah Compatible
In the Box
- Rider 320 Main Unit
- USB Cable
- Bike Mount
- Quick Start Guide