Hope Direct Shifter Mounts - Tech Lever
Hope Direct Shifter Mounts - Tech Lever
Code: 2524
Save weight and clutter on the bar with the Hope direct shifter mounts for Tech model brakes.
  • All Tech master cylinders can be fitted with our aftermarket,direct mount shifter clamps.
  • Tidy your bars up with these neat, CNC machined aluminium clamps.
  • Suitable for Sram and Shimano the mounts allow the shifter to be fitted directly to the brake clamp and hold the shifter in a comfortable position.
  • For I-Spec A and I-Spec B types, No shifter mounts required with the Tech3 brakes. The Shimano shifter will mount direcly on the Tech3 master cylinder. Note: For I-Spec B type shifter you will need Hope parts M5x16 cap screw and HBSP322 square nut.
  • For I-Spec 2 types, shifter mount HBSP327LH or HBSP327RH for left or right hands.
Please enter your e-mail address below then click Notify Me to be notified when this item comes back into stock. We will not use your e-mail address for any other purpose.
The following errors occurred:

Please correct the errors and try again

   

Shipping charges for this item to United States: $6.43

Spend $64.25 or over and get free shipping
$ 6.43
General information about our shipping
Have a better position than Shimano and the Quality of Hope products are so high
Do the job great, I'm actually using them with a set of Hayes strokers. Free up handlebar room and make adjusting the cockpit easier too. The two mounts are identical so I'm using them both on the right hand shifter on 1x setups.
These have been great to mount my new XT levers and clean up my handle bars. Much better than using my old SLX levers which had to be mounted on a bad angle to make them fit.
Hope shifter mounts are a direct fit onto Avid Elixir CR's. Well done Hope as you have inadvertently solved my mounting problem for me. Superb.
They do what they are supposed to - allow SRAM shifters to mount onto the brake lever clamps - and they do it well. The shifters are well positioned with a little room for fine tuning, which keeps the bars nice and clutter free. Whilst they are a wee bit pricey for a couple of half clamps, they are well made and are cheaper than most of the other solutions on the market (and a lot cheaper than buying a pair of shifter clamps if your bike came with SRAM/Avid Matchmakers!)
Oh those gods in barnoldswick...... Got these on both bikes. They give you lots more space on the bars. They allow you to get the spacing of your brakes and shifters perfect. They look cool. Takes ten minutes per brake to fit them - though you do NEED the ispec mounts for the shimano shifter pods.
These mounts tidied up the handlebars a treat. Prompt service from Merlin, as usual.
Great upgrade, leaving the bars less cluttered. Works well with my sram X7 shifters.
Well it must be me then because I just can't get a comfortable position trying to synchronize my XT 770 shifters with the Hope levers. I thought these direct mount clamps would do the trick but no, my hand is still fouling on the gear lever, and I have tried every position possible. Pity because its a great idea and as usual from Hope nicely made. Merlin service faultless.
Used with my XT shifters (m780), it solves the problem of the shifter's lever being too far away from my thumbs. It is adjustable too. Perfect fit and makes your cockpit looks tidy and neat.
Good, neat solution to crowded bars.
I had to get these because of compatibility/space issues between shifter and brake lever ,Got to say I'm very pleased with the out come they have really tiedied up my handle bars ,brilliant hand position and look really good too ....Happy riding :0)
Great bit of kit, work really well and look fantastic!
Great fit, wonderfully machined. I also use the XTR version which works with all the current Shimano i-spec shifters.
Can't go wrong with these, they do the job so perfectly and look so slick.
Solid product and service thanks merlin
I bought these for XT shifters. Worked really well and super simple.
One of the best Upgrades purchased in ages! These are perfect! They save weight and tidy the the bars up a treat. Before I was always catching my thumb on the shifter, now the shifter is way clear of the thumb, should have got these years ago. Many Thanks.
Does as it says on the tin. More adjustable than the standard matchmaker clamps in my opinion.
Does exactly what it's designed to do.. Tidys up the bars and puts the shifters where they need to be, as the new tech levers do clamp nearer the bar centre for one finger braking. Well made and the fit is nothing short of what you would expect from hope.
Perfect for mounting your shifters in just the right place. makes the bars look neat and tidy to. If you have tech leavers then you need these