Knog Blinder 1 Rechargeable LED Front Bike Light is no longer available at Merlin Cycles. However you may find an alternative or updated product below.
Knog Blinder 1 Rechargeable LED Front Bike Light
This item was discontinued 28th September 2016.
If you require help finding an alternative to this product please contact customer services.
Modern lighting for your bike, the Blinder 1 is a high-powered surface-mount LED light visible at over 500m; the lithium polymer with its inbuilt USB recharge is held by a flexible silicone strap and clip, perfectly this is a tool-less attachment for handlebars and frames of 22-32mm.
- Dimensions: 25 x 25 x 33mm
- Weight: 15g
- Materials: UV-Resistant Industrial grade silicone. Polycarbonate Lens, Latch and Housing. Hard-anodised aluminium fascia.
- USB: Rechargeable Lithium Polymer battery
- Front: 20 lumens (LED Rating)
- LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride.
- Lens: Use of an optic design to provide a balanced ratio of beam width and distance to safely illuminate you and the path ahead.
- Visibility: Light is visible at over 500 metres.
- Light Modes: 5 light modes: Steady, Fast Flash, Organic Flash Slow, Organic Flash Fast, Eco-flash.
- Burn Time: Burn time of over 2-hours in constant and up to 11-hours eco-flash mode.
- Battery: Rechargeable Lithium polymer battery via integrated USB plug.
- Integrated USB Plug: Designed to be exposed to the elements, the plug is also waterproof and will not be damaged by exposure.
- Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. The light is switched off with a long button push off (0.5sec).
- Storage Mode: Storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isn't being used.1. Charge the light for a full charge cycle. (Indicator glows green when charged).2. Remove light from USB charging device / port.3. Turn light on in any mode.4. Hold button down for more than 5 seconds, at which point the indicator LED will turn red.5. The light itself will remain on until the Blinder switches itself off and into storage mode.
- Bike Attachment: Tool-less attachment for handlebars/rear-posts and frames of 22-32mm ø
- 100% Waterproof: The Blinder 1 is IP66 Tested and 100% waterproof against all elements.
- Testing: The Blinder 1 has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock and static, vibration and impact, temperature and humidity, cycle testing and CE certification.
Shipping charges for this item to United States: $6.25