FROM
RRP
In Stock
Multi-Buy Savings!
Code: KNOG-1195
Knog Blinder Mini Chippy Front Light
The Blinder MINI has three characters in the gang. "Dot" with a single powerful LED. "Niner", so called for its array of 9 LEDs. And "Chippy", with Chips on Board technology giving a panel of light.
 
These surface mounted LEDs punch well above their weight, with the 20/11 lumens for front/rear getting you seen from over 500m away. Niner and Chippy have reflected faces for added safety, and Dot, vain as she is, has a faceplate for added style and comes in 4 colours. With a weight of only 15 grams the light uses its tool-less attachment to securely connect to handlebars and frames of 22-32+mm.
 
Features:
  • Lens: Use of an optic design to provide a balanced ratio of beam width and distance to safely illuminate you and the path ahead.
  • Visibility: Light is visible over 500 metres 
  • Peak brightness: Front: 20 Lumens, Rear: 11 Lumens
  • 5 Light modes: 1. Steady, 2. Strobe Flash, 3. Fading Flash, 4. Lightning Flash, 5. Eco Flash.
  • Low battery indicator
  • Integrated USB Plug Designed to be exposed to the elements, is waterproof and will not be damaged by exposure. 
  • Replaceable strap for tool-less attachment. 2x removable FRONT light straps for bars 22-27mm / 27-32mm and 3x removable REAR light straps for posts 22-32mm+ and AERO POST COMPATIBLE
  • Charge time: 2.5 hours
  • Charge Type: Via integrated USB plug. Waterproof, tough and can be plugged in directly - no need for cable.
  • Button: Longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec).
  • Battery storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isn't being used. Refer to the instructions online. 
  • Testing: The Blinder MINI has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock and static, vibration and impact, temperature and humidity, cycle testing and CE certification.