Shimano Disc Brake Brackets
- Front and rear Shimano disc brake adapters
- Take the standard 160mm post mount caliper to the required fitting/rotor size
- Can be used with other manufacturers (but not all) disc brakes
Shipping charges for this item to United States: $8.30
- Estimated delivery transit time: 5-10 Days
Royal Mail Std. Airmail 5-10 Days: $8.30
Royal Mails standard Airmail service. Worldwide delivery at a very good price, no tracking. Handed over to your countries own national delivery service once past customs. Delivery time - allow up to 10 days for non EU countries
Royal Mail Priorty Airmail 4-8 Days: $16.60
Royal Mail international serivce is the quickest and best service for small parcels. For Europe please allow 3-7 days, for Australia, USA, Canada, Japan and other countries the service is normally 4-8 working days. This service allow some tracking and requires a signature.
It's doing what a bracket should do! Only been on one week but 60 odd miles of beautifully fast, dry, dusty and rocky bridleways later the rear brake caliper has not fallen off. So that is good.
These brake adapters are spot on. They work with Shimano and Avid brakes (no doubt most other brands too), they're nicely made and they're cheap. Fit and forget.
Highly recommend buying OEM rather than cheaper copies, the fitting & alignment is guaranteed to support your Shimano brake. Lesson learned as you can tell.
Shimano brake adaptors always fit no messing around.
Installed easily alongside new Ashima 180mm rotor - as you'd excpect with Shimano, nicely machined bit of kit. You do get little plastic things to stop the bolts from loosening themselves but the bolts come with washers so I didn't use them.
Great piece of kit though simple in design helped me to fit a fantastic brake set I obtained from the same supplier that supplied me this sweet little number. Paint quality is super smooth and it does what it says on the tin
Needed these to mount my new Deore brakes, they do the job perfectly.
Boring but necessary. Lighter than some other aftermarket options.
Simple to assemble and comes with all the screws and adjustment washers.
Matched up to my Hayes Primes without issues, solid as a rock.
What can you really say other than it does the job it was designed to do.
If you are switching from another brand to Shimano calipers, then you need these. Your brakes may work with other adjusters, but you will not get maximum brake efficiency. Get this bracket, it works.
Does what it's meant to do and positions the front caliper for a 180mm rotor [post mount].
Does what it should. Comes with bolts, washers and the little plastic clips to stop them unscrewing.
Just as described fitted my new shimano brakes perfectly.
Well, It's a bracket! It does bracket type things...
Does what it says on the tin! Also, unlike some (looking at you formula) these are compatible with other brands.
Not my favourite design, Hope ones seem more sturdy, this is a bolt through spacer. Does the job though, excessive packaging! - the usual superb service from Merlin :)
Does what it does! Lightning fast delivery as usual from Merlin.
Simple do what they are supposed to do! :)
Perfect. Fast delivery. did as they should. best price around!
Nicely finished, do exactly what they're supposed to.
Great quality. Fits perfect.
Spot on and great service as expected.
Does exactly what it says on the tin!! Fast delivery too!
Excellent delivery as normal; very easy to fit.
Absolutely perfect shimano quality - comes with all the necessary bolts and fixings - recommended product
Nice and cheap with fast delivery. What more could you want?
Fits on perfect, does the job.
Sweet! these look good and do the job perfectly.
Does what it says - not much esle to add
I ordered front and rear adapters to fit a new set of Shimano brakes. I wasn't 100% sure I'd need them as I already had a setup for the Juicy 5s I was swapping out but I figured the Shimano stuff is all engineered to work together - like a guarantee all the thousandths of inches matched up!
Granted, adapters are such a simple looking thing but in this case complexity is hidden by good design. They're very well made, right up to the expected high Shimano standards. Instructions were easy enough to follow and everything went together sweet-as. I'm no Red Bull pilot but where I ride, brakes need to be reliable, so why would I piss around with pick & mix mounting adapters?
fit and function as expected
Does exactly what it says on the tin, makes setup straightforward.
Does exactly what it's meant to without crying. If you need one, buy this one, don't bother saving money, just buy a decent bit of kit!
Compared to the generics you can get the price may be a bit high, but what made me buy this was the ease of figuring out what I needed Post Mount 205mm simple, rather than F205PMR183IS or what ever mad code the companies that make the generic ones want you to figure out.
Exactly as described - Fast delivery & well packaged.
It's a disc caliper adapter and it works, not a lot more to say!
Does what it says on the tin. works brilliantly
Usual Shimano quality, fitted perfectly.
Quality item and the finish looks extremely durable. For the money you cannot really quibble.
As usual super fast delivery and quality genuine parts
Typical shimano quality and finish.Easy to fit with straight forward instructions.Just double check which fitment you need i.e post mount or i.s and correct rotor size before ordering.
Does as advertised, good price, delivered quikcly
nice, easy to fit and good price.
light and cheap. what else could you ask for?