Profin Fox CTD DPS Volume Spacers - Pack Of 5
Full Screen
Exit Full ScreenPreviousNext
Profin Fox CTD DPS Volume Spacers - Pack Of 5
Code: PRO-FOX-CTD
Profin Fox CTD DPS Volume Spacers - Pack Of 5
The Profin Fox CTD volume tokens are 3D printed from a high quality chemical and oil resistant polymer - PETG, which is used for drinks bottles, chemical containers, fuel tanks etc. The Profin Fox CTD /DPS Volume Spacers are a aftermarket equivalent to Fox 803-01-250 for 9mm shaft.
 
Volume spacers will increase the spring curve of your rear shock making it stiffer at the end of the stroke. This is a great way to keep your shock nice and active at the start of the stoke as you can run lower pressures thereby decreasing breakaway friction and improving small bump compliance. The increased spring curve will help prevent progressing through the travel too quickly and the shock bottoming out.
 
Pack Includes
  • Size 5 Largest - 0.95in3 equivalent to Fox 233-00-354 (Cannot be fitted to older CTD Shocks see 3rd picture and paragraph below)
  • Size 4 - 0.8in3 equivalent to Fox 233-00-353 (Cannot be fitted to older CTD Shocks see 3rd picture and paragraph below)
  • Size 3 - 0.6in3 equivalent to Fox 233-00-352
  • Size 2 - 0.4in3 equivalent to Fox 233-00-351
  • Size 1 - 0.2in3 equivalent to Fox 233-00-350
 
Please Note: If you have a Fox CTD rear shock and the eyelet measures 46mm in diameter on the thinnest part of the eyelet then sizes 5 and 4 will not fit however sizes 1, 2 and 3 will. Later shocks have a bigger eyelet casting.