Enve SES 6.7 Disc Clincher Road Wheelset - 700c
Full Screen
Exit Full ScreenPreviousNext
Enve SES 6.7 Disc Clincher Road Wheelset - 700cEnve SES 6.7 Disc Clincher Road Wheelset - 700cEnve SES 6.7 Disc Clincher Road Wheelset - 700cEnve SES 6.7 Disc Clincher Road Wheelset - 700cEnve SES 6.7 Disc Clincher Road Wheelset - 700c
Code: EN101167100311
Enve SES 6.7 Disc Clincher Road Wheelset - 700c
The Enve SES 6.7 is the ultimate balance between weight savings, stability, aerodynamics, and rolling efficiency, the SES 6.7 defines Real-World Fast and raises the bar for modern aero wheel performance. Grams of rim, versus grams of drag, make the SES 6.7 the outright fastest wheel on the road.
Once a rim goes beyond the 70mm depth, aero efficiency rapidly tapers off and the additional weight quickly begins to neutralize the marginal aero gains that the deeper rim provides. These are the learnings from more than a decade pursuing the ultimate Real-World Fast aero wheelset.
With year's of experience CFD and the wind tunnel testing help Enve to landed on the sweet spot of aerodynamics, weight, and stability to create a wheelset thatgoes head-to-head in the wind tunnel with the very best time trial and triathlon wheels on the market. Couple that with an impressively light sub-1500 gram weight, superior stability, along with a high-volume design, and you end up with a wheelset that defines Real World-Fast.
The SES 6.7 has been aerodynamically optimized around a labeled 27mm tyre since data shows unequivocally that in real-world riding conditions, a higher volume tyre provides more speed, confidence, and control. Featuring a 23mm internal rim width, the SES 6.7 can be paired with a 25mm tyre, but for those wanting to decrease rolling resistance and maximize speed, a 27mm-28mm tyre is the optimal labeled tyre width.
Like the rest of the SES wheel line, the SES 6.7 has been optimized for road tubeless performance and features a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance. To further improve tubeless tyre and rim reliability, this aerodynamic carbon fiber wheelset features Enve’s patent pending Wide Hookless Bead, a design element at the leading edge of the rim that provides a more forgiving surface, that when impacted, will reduce the likelihood of pinch-flatting a tubeless tyre.
  • 1497g wheelset (Enve hub w/XDR driver)
  • Optimized at the points of diminishing return for drag reduction, stability and weight
  • 23mm internal rim width
  • 60mm deep front rim / 67mm deep rear rim with Enve's patented moulded spoke hole technology
  • Aero-optimised for the Enve SES 28mm tyre
  • May be run with 25mm, tubeless-ready tyres
  • Tubeless-compatible only, hookless construction, may run inner tubes with tubeless tyre
  • Handcrafted at Enve's HQ in Ogden, Utah, USA
  • 5-year Factory Limited Warranty, cover through Enve's Incidental Damage Protection Programme
  • Rim: Carbon, Clincher
  • Brake Surface: Disc brake
  • Front Depth: 60mm
  • Rear Depth: 67mm
  • Front Width: 23mm Internal / 30mm External
  • Rear Width: 23mm Internal / 29mm External
  • Front Axle: Enve Alloy Road, 12x100 Thru-Axle
  • Rear Axle: Enve Alloy Road, 12x142 Thru-Axle
  • Freehub: Shimano 
  • Rotor Mount: Centrelock
  • Front Count: 24 
  • Rear Count: 24
  • Weight: 1497g per pair without tyres
  • Minimum Tyre Size: 25mm
  • Includes: Tubeless Kit 2x valve stems, 1x roll of tape (good for taping 3 wheels), 2x Pressure Relief Valve Stem Nuts, Accessory Bag, Wheel Manual, Wheelbuild Card