Stans No Tubes Road Tubeless Kit
Stans Road Tubeless Kit
Everything you need to complete your tubeless ready wheelset. In this pack you will find everything you need to complete your tubeless ready wheelset as well as detailed instructions of how to do it.
- 2 x 2oz Sealant – Pre-measured and ready to apply to one road bicycle tyre – seals punctures up to 6.5mm virtually instantly. Can be applied directly through valve using the tapered nozzle by removing the valve core
- 1 x Rim Tape – 10 yard roll of lightweight rim tape, used to make your tubeless rims air tight. Enough to tape 2 road rims with a double layer
- 2 x Presta Valves – Valve stems with removable valve cores. Fits up to 8mm valve hole.
kevin Superb worked first time
old55 Have done 2 front rims with this kit . 2 layers of the tape are recommended for road rims presumably because of the higher pressure . The rims need to be cleaned properly so the tape adheres . It helps if the wheel is on the bike in a workstand so the tape can be applied as tightly as possible to ensure a good seal . Both tyres fitted to 12 y.o. rims and both sealed and are holding pressure well . Will use Stans again .
Mr Richmond Great kit except for the rim tape which is terrible, it's very stiff and struggles moulding to the shape of the rim. Had to use gorilla tape in the end as it is much better suited for the job. Oh and make sure you have something like an airshot to seat the tyre, makes things so much easier.
Mr BRAVAKIS Very Good !!!
Mr Bak Good kit and easy to install. A bit difficult to remove valve top.