Wolf Tooth ReMote Dropper Lever
Full Screen
Exit Full ScreenPreviousNext
Wolf Tooth ReMote Dropper Lever
Multi-Buy Savings!
Code: WTREMOTEC
Wolf Tooth ReMote Dropper Lever
The Wolf Tooth ReMote Dropper Lever is ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.
 
Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers. 
 
Compatibility
  • Compatible with all cable actuated dropper posts.
  • Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.  
  • If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.
 
Mounting Types
  • ReMote 22.2mm: Includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
  • ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware
  • ReMote IS-II for Shimano I-Spec II - includes IS-II hardware
  • ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.