Silca EOLO 2-N-1 Tyre Levers
RRP
Code: 8100931605
Silca EOLO 2-N-1 Tyre Levers
Modern carbon rims and tyres create a real challenge for traditional tyre levers, and the new wave of tubeless setups have take the challenge to the next level. Tyres fit tighter than they've ever been, while carbon rims require non-metal levers to resist damage to the bead or brake surface during use.
Tyre Levers Premio were designed for safe use on carbon fibre rims if used properly and as intended. To ensure proper use on your specific set of wheels, you MUST refer to your wheel manufacturer's guidelines on using tire levers.
General Advice
- Tyre Levers should ONLY be used to remove the tyre. Never use a tyre lever to aid in tyre installation. This is not the intended use case for the tool and could result in damage.
- Make sure the orientation of the blade of your tyre lever is correct before use. Using a tyre lever that is upside down is not only more difficult to use but it could result in damage.
- Silca don't recommend using these tyre levers if you're using latex inner tubes.
CO2 Regulator Use:
- Thread CO2 cartridge into regulator head fully
- Press regulator onto either Presta or Schrader Valve
- To control the flow of air, turn CO2 cartridge to the left to allow air flow, and to the right to restrict it.
Specification
- Carbon safe
- Integrated CO2 Regulator
- Forged alloy construction
- Reinforced nylon rim shield
- Integrated spoke-hook wing
- SizeL 105x25x7mm
- 46g - two levers and neoprene sleeve
