RRP Proguard Rear Mudguard
RRP Proguard Rear Mudguard
Designed to help protect your shock, linkages and bearings from getting hammered by mud, dirt and water from your back wheel. This helps to minimise cleaning post ride and maximise intervals between services.
- ProGuard rear's versatile design allows for easy fitment on a huge range of bikes.
- 43 snap-off top holes to fit straight braces between the seatstays, raised braces, or dropped braces including those with supporting struts
- Indent to create 4mm of additional tyre clearance
- Side arms designed to fit conventional seatstays (that go to centre of wheel), and offset seatstays (raised up from centre of wheel)
- Recess to protect sticker allowing you to match the sticker on your ProGuard Front mudguard
- Made of the same thick Polypropylene material used on the ProGuard Front
- Same gloss finish as the ProGuard Front.
- 6 zip ties are provided
Mr Ireland After researching all available rear mtb mudguards I decided on RRP. After several off road rides including mud the Proguard has proved effective on my 29er hardtail. I did have to modify it slightly to fit my bike, but that may not be necessary for other make's.
Mr Hall Not the cheapest mudguard, but definitely worth the expense, well designed and made and easy to fit.
Filipe Gil After faffing around with cheaper items, I've found what I always wanted. Does the job superbly whilst looking great on the bike. Spot on!
stuart Brilliant mudguard, as good as all the reviews suggested.
Mr Grundy I have been looking for a rear mudguard for my Trek full suspension mountain bike that gave good clearance for mud, fitted the frame securely and looked good, the RRP Proguard did it all at a reasonable price.
Mr Bougeois III Sleek design, low profile, quality materials and functional.
DE Great rear mudguard. I had to drill/cut out on either side to fit on a Giant Stance 1, but it was simple enough to do. Definitely helps keep the mud away from the shock and frame.
Joseph Stillwell I had to run a Minion 2.4 instead of the 2.6 I had been running on my Ibis HD4 to make this work. My shock and pivots stay way cleaner now!
Mr Clarke Unfortunately this rear mudguard did not provide enough coverage once fitted to my stumpjumper comp carbon however fits perfectly on my friends Devinci.
Mr Slizauskas Quality definatly good . Will buy another pair for my BirdEaris145.
weave1 Quality product. I`ve used this with my plus bike with a reverse monitou fork (29er with 3.0 tyres). I`ve fitted the rear proguard to both the front and rear of my bike as its the only mud guard ive found to work with a reverse arch fork. they are brilliant
Mr Cohen Great product well made and connects well. Hit the mark
Mark A very neat, looks great and easy to fit mudgaurd. Works well on my Canyon Strive. The only issue with it is it is rather small which means it doesn't offer a lot of coverage of the bike and definitely does not protect you from getting covered with mud. It's ok for me but if your looking for maximum protection I wouldn't get this mudgaurd.
JOHN Easy to fit, robust, looks good and keeps the worst of the spray off you. What more could you want?
HashTag Good mudguards are quite expensive, although this one is quite reasonable and keeps the majority of mud away from your behind. Made in England too so recommended.
Richard Satterthwaite I spotted this at the Cycle Show and was impressed by its simplicity to install, coverage around the wheel and quality of material. It's a stylish addition to the bike and accommodates tyres up to 29inch. It offers superb protection from water spray and mud splatter. Overall very pleased with this purchase.
Mr Fayle Bit smaller then I thought but over all very good mudgard well recommended
Mr Varney Great quality, perfect sizing and works well at keeping rear suspension shock clean
Laurence Nice sturdy product, easy to fit, great coverage